RBX101780 - Suspension Bush – Front Lower Arm C-Lamp Lens Reverse gear 20 Teeth Roller

Reverse gear 20 Teeth Roller bearing From Suffix 'B'

for use during engine overhaul

This signal establishes engine position for the control module

control the oil film on the bore and conduct heat from the piston into the cylinder

the bracket that mounts the rear mudflap to the body behind the wheel

RBX101780 - Suspension Bush – Front Lower Arm C-Lamp Lens Reverse gear 20 Teeth RollerSuspension Bush Front Lower Arm is the inner pivot bush of the front lower wishbone, pressing into the arm body at the inboard chassis end mounting. The bush absorbs road vibration and provides controlled compliance at the lower arm's inboard pivot. Wear causes audible clunking over uneven surfaces, imprecise handling and potential tyre wear as the lower arm geometry shifts under braking and cornering loads. Two bushes are required per vehicle.